FIBREFLEX CNA-9000 is an asbestos free gasket material based on a combination of aramid and other synthetic 
fibers with NBR binder. This green colored sheet has excellent oil and fuel resistance combined with good stress relaxation 
and high tensile strength.  FIBREFLEX CNA-9000 is primarily used as sealing against cold and hot oils, gases, fuels, and 
coolants with corrosion inhibitors, antifreeze and hot water.

COMPLIANCE CERTIFICATION: FIBREFLEX CNA-9000 is certified to be in compliance with ASTM F104 F712120A9B3E22-M6.

PHYSICAL TEST PROPERTIES:				SPECIFICATION		TYPICAL VALUES
Compressibility (ASTM F 36)				5-15%			10%
Recovery (ASTM F 36)					40% MIN			58%
Density (ASTM F146)					110 lbs/ft3min		113 lbs
Creep Relaxation (ASTM F38)				20% MAX			17%
Sealability (ASTM F37B)					1.5/ML/HR		0.30 ML/HR
Ignition Loss (ASTM F495)							29%
Tensile Strength (across grain)(ASTM F 152)		2000 PSI MIN

FLUID IMMERSION PROPERTIES:				SPECIFICATION		TYPICAL VALUES
ASTM FUEL A	- (5 Hrs/Ambient)
		- Weight Increase			15% MAX			13%
		- Thickness Increase			10% MAX			2%

ASTM FUEL B	- (5 Hrs/Ambient)
		- Weight Increase			15% MAX			14%
		- Thickness Increase			5-20%			6%

IRM OIL 903	- (5 Hrs/300 F)
		- Weight Increase			15% MAX			12%
		- Thickness Increase			15% MAX			9%

ASTM OIL#1	- (5 Hrs/300 F)
		- Weight Increase			15% MAX			10%
		- Thickness Increase			10% MAX			4%

The values shown above are based on laboratory tests and should be considered typical values only.  They do not imply a 
specification and are not to be used as a purchase specification requirement.